- High-Quality Torx Screws & Custom Star Drive Fasteners | FASTKING
- sales@jlfastener.com
Material Selection and Heat Treatment of Torx Screws
Material Selection and Heat Treatment of Torx Screws
Material Selection and Heat Treatment of torx screws
torx screws transmit torque through the star recess; recess precision and material properties together determine assembly performance. Material sets the base for strength and corrosion resistance, heat treatment balances hardness and toughness, and coating governs protection and appearance. This article explains how they combine, per product datasheets.
The core of selection is clarifying service conditions—load, humidity, disassembly frequency and tamper resistance—then matching material, grade and finish.
Common Materials
Carbon and alloy steels dominate, with carbon, manganese, chromium and molybdenum tuned for strength and hardenability—typical for classes 8.8, 10.9 and 12.9. Alloy steel suits higher strength and larger sizes; carbon steel suits general connections.
Stainless SUS304 and SUS316 offer good corrosion resistance for outdoor, humid, food and medical settings, though lower strength than high-strength alloy—mind the load. Non-ferrous and plastic grades serve insulation or lightweight needs.
Heat Treatment
Quench-and-temper delivers balanced mechanical properties, standard for 8.8 to 12.9 bolts. Quench temperature, tempering temperature and holding time set hardness and toughness, verified per heat.
Carburizing forms a high-carbon surface for wear resistance, suited to self-tapping and self-drilling screws—hard case, tough core, combining drilling and thread forming. Hardness and mechanical properties are tested after treatment.
Hydrogen Embrittlement Control
Plating can introduce hydrogen into high-strength parts, causing delayed fracture. Controls include stress relief before plating, low-embrittlement processes and timely post-plate baking.
Classes above 10.9 need special care; critical joints prefer mechanical zinc, Dacromet or stainless and coating solutions that avoid the risk.
Coatings and Protection
Common coatings are zinc, zinc-nickel, nickel, Dacromet and black oxide. Zinc is economical and versatile; zinc-nickel resists corrosion better for outdoor and automotive; Dacromet is hydrogen-free with good corrosion and heat resistance; black oxide serves appearance and light protection.
Thickness and salt spray follow the environment; coastal and outdoor projects raise the grade. Coatings must not impair thread fit—confirm smooth engagement before assembly.
Recess Precision Control
Torx recesses are formed by dedicated dies; depth, width and star angle affect bit fit and torque transfer. Die wear shallows or deforms the recess, causing slip and low torque—set die replacement cycles by output.
Recesses are checked with dedicated gauges or projectors, sampling depth and completeness. Stable recess precision ensures automated assembly yield and tamper resistance.
Selection Guidance
General connections use carbon or alloy quench-tempered parts by load; outdoor and humid settings use stainless or high-corrosion coatings; frequently serviced joints use wear-resistant coatings with matched bits; tamper-resistant needs use security recesses.
After selection, confirm batch process and inspection requirements, and specify material, grade, coating and recess on drawings and orders to keep samples and production consistent.
Batch Consistency and Traceability
Production follows confirmed material, grade and coating; raw material is managed by heat lot, with heat-treatment and plating parameters recorded. Batch numbers span production and inspection for trace-back.
Before shipment, torque fit and recess状态 are sampled against sealed samples. Batch data ties to orders, supporting repeat purchases and improvement.
PREVIOUS:Set Screw Anti-Loosening and Fatigue Design:
No next

