News Center - Torx Screw Knowledge & Support | FASTKING

Technical document for internal torx fasteners: T‑size selection, difference between standard torx and security pin‑torx, bit matching, tightening torque, root‑cause & prevention for torx‑recess cam‑out and notch cracking. ---2026-09-18

Torx fastener market analysis driven by automotive and security hardware, demand changes for standard torx and pin‑torx anti‑tamper screws, key notes for specification selection, sourcing and overseas projects. ---2026-09-15

Detailed guide to pin-in and hole-type security Torx screws, security grading, and selection for public infrastructure, electronics and automotive anti-theft applications. ---2026-09-13

Mechanical analysis of Torx star drive torque efficiency versus Phillips/slotted drives, with torque coefficient and preload control recommendations. ---2026-09-11

Analyze the 6-point star drive's high torque transfer, cam-out resistance and automation compatibility, with typical uses in automotive, electronics and machinery. ---2026-09-09

Comparison of torx, phillips and hex socket screws in industrial applications, covering anti-slip, anti-vibration and automated assembly performance for fastener upgrading. ---2026-09-07

Industry insight for hexalobular torx fasteners, comparison between torx and phillips drive, market trend for automation, energy‑storage cabinet and security hardware. ---2026-09-03

Torx screws are commonly available in M2-M16 metric and inch series. Common models and their applications are summarized here. ---2026-08-26

GB, DIN, ISO and ANSI are the most common fastener standards. This article briefly introduces each system and how to choose. ---2026-08-26

Custom screw development involves requirement review, drawing confirmation, sampling and mass production. The full process is explained. ---2026-08-26