News Center - Torx Screw Knowledge & Support | FASTKING

Torx set screws are used for positioning and locking shaft parts. Correct selection, installation torque and point type are key to reliable fixing. ---2026-08-26

Zinc plating, black oxide, e-coating and Dacromet are the four most common fastener surface treatments. This article helps you choose the right finish for your products. ---2026-08-26

Torx security screws prevent unauthorized removal through special drive and pin-in-drive designs, widely used in public facilities, electronics and outdoor equipment. ---2026-08-26

304 and 316 stainless steel Torx screws differ in corrosion resistance, application scenarios and cost. This article provides selection guidance from composition, performance and application. ---2026-08-26

Torx screws and Phillips screws differ significantly in drive design, torque transmission, slip resistance and tool life. This article compares them in detail. ---2026-08-26

Torxscrew supplies internal torx screws, tamper-proof security torx screws and flange torx bolts from T6 to T50. Carbon steel & stainless steel customization available for automotive, 3C electronics and EV charging equipment assembly. ---2026-08-04

Charging piles, municipal facilities, communication cabinets and shared equipment often require exclusive custom special-shaped security screws. Incomplete drawing information leads to repeated sample revision and delayed lead time. This article sorts mandatory marking items on custom security screw drawings, compares mold cost and lead time between standard security recesses and brand-new custom ---2026-07-29

Six major anti-disassembly screw recess types including pin TP torx, inner pin torx, pentagon security, tri-wing, Y triangle and slot security have huge gaps in applicable scenarios. Different equipment anti-theft grade requirements match exclusive recess designs. This article compares anti-prying difficulty, tool universality and processing cost of six recesses via table, formulates selection sta ---2026-07-25

Outdoor charging piles, road monitoring and scenic equipment often require non-standard size, special recess and custom surface treatment TP tamper torx screws. This article sorts full custom workflow including drawing confirmation, mold opening, material selection, surface finishing and delivery inspection, compares mold cost & lead time of different custom demands via table, analyzes rectificati ---2026-07-23

Pin tamper torx screws are widely used in outdoor charging piles, road monitoring and communication cabinets. There are obvious differences in weather resistance and shear strength between 201, 304, 316 stainless steel and galvanized carbon steel versions. This article compares material parameters, formulates selection standards for inland, coastal and marine outdoor scenarios, and explains assemb ---2026-07-19